Device manufacturer, as written on reports

Microport Orthopedics: medical device reports filed with FDA

13,267 reports name it as the manufacturer of the device involved, 2014–2026.

Read first · FDA's statement on these data

Adverse event reports submitted to FDA do not undergo extensive validation or verification. Therefore, a causal relationship cannot be established between product and reactions listed in a report. While a suspected relationship may exist, it is not medically validated and should not be the sole source of information for clinical decision making or other assumptions about the safety or efficacy of a product. Additionally, it is important to remember that adverse event reports represent a small percentage of total usage numbers of a product. Common products may have a higher number of adverse events due to the higher total number of people using the product. openFDA, FDA

FDA adds: "Although MDRs are a valuable source of information, this passive surveillance system has limitations, including the potential submission of incomplete, inaccurate, untimely, unverified, or biased data. In addition, the incidence or prevalence of an event cannot be determined from this reporting system alone due to potential under-reporting of events and lack of information about frequency of device use." And: "MDR data alone cannot be used to establish rates of events, evaluate a change in event rates over time or compare event rates between devices. The number of reports cannot be interpreted or used in isolation to reach conclusions about the existence, severity, or frequency of problems associated with devices."

Do not rely on openFDA to make decisions regarding medical care. While we make every effort to ensure that data is accurate, you should assume all results are unvalidated.

Not medical advice. This site counts what was reported to FDA. Questions about a medicine or device belong with a pharmacist or clinician.

13,267
reports naming it as manufacturer: 0.1% of all MAUDE reports; 535
reports, 12 months to August 2026: 374 in the 12 months before; 0.8%
classified as malfunction: 62.3% across all reports; 0.1%
classified as death, as reported: 0.9% across all reports

13,267 medical device reports received by FDA give Microport Orthopedics as the manufacturer of the device involved, 0.1% of the MAUDE database, from January 2014 to August 2026. Manufacturer names are as written on the report; subsidiaries and spelling variants may appear as separate names.

535 reports arrived in the 12 months to August 2026, up 43% from 374 in the 12 months before. FDA releases MAUDE data monthly; reports can arrive months after an event, so the newest months grow in later releases. The event types recorded are injury (98.7%), malfunction (0.8%) and death (0.1%). Manufacturers are required to report events they learn of, so a large manufacturer with many products in use files many reports. FDA states that "MDR data alone cannot be used to establish rates of events, evaluate a change in event rates over time or compare event rates between devices. The number of reports cannot be interpreted or used in isolation to reach conclusions about the existence, severity, or frequency of problems associated with devices." It adds that the reporting system "has limitations, including the potential submission of incomplete, inaccurate, untimely, unverified, or biased data."

Brands named most often

Brand	Device type	Reports	Latest 12 months	Classified as death
Conserve R Total A-Class Head	Prosthesis, hip, semi-constrained (metal cemented acetabular component)	857	0	0%
Conserve R Plus Cup	Prosthesis, hip, semi-constrained (metal uncemented acetabular component)	838	0	0%
Profemur R Modular Femoral Neck	Prosthesis, hip, semi-constrained, metal/polymer, uncemented	804	0	0.1%
PROFEMUR Modular Femoral Neck	Prosthesis, hip, semi-constrained, metal/polymer, uncemented	401	29	0.2%
Profemur R Cocr Neck	Prosthesis, hip, semi-constrained (metal uncemented acetabular component)	385	0	0.2%
Head	Prosthesis, hip, semi-constrained, metal/ceramic/polymer, cemented or non-porous, uncemented	274	0	0%
Conserve R Total Head W/Bfh	Prosthesis, hip, semi-constrained (metal uncemented acetabular component)	242	0	0%
Conserve R Plus Spiked Cup	Prosthesis, hip, semi-constrained (metal uncemented acetabular component)	241	0	0%
Conserve R Plus Ha Cup	Prosthesis, hip, semi-constrained (metal uncemented acetabular component)	224	0	0%
Dynasty R Cocr Liner	Prosthesis, hip, semi-constrained (metal cemented acetabular component)	201	0	0%
Acetabular Component	Prosthesis, hip, semi-constrained, metal/ceramic/polymer, cemented or non-porous, uncemented	182	0	0%
Dynasty R A-Class R Poly Liner	Prosthesis, hip, semi-constrained, metal/polymer, porous uncemented	165	0	0.5%
Advance R Tot Cond Femoral Non-Porous	Prosthesis, knee, patellofemorotibial, semi-constrained, cemented, polymer/metal/polymer	134	0	0%
Femoral Head Biolox Delta	Prosthesis, hip, semi-constrained, metal/ceramic/polymer, cemented or non-porous, uncemented	134	0	0%
Advantim R Tibial Self-Tap Cancellous Bone Screw	Screw, fixation, bone	132	0	0.6%
Profemur R Z Stem Plasma Sprayed	Prosthesis, hip, semi-constrained, metal/polymer, porous uncemented	130	0	0.3%
Conserve Plus Cup	Prosthesis, hip, semi-constrained (metal uncemented acetabular component)	109	4	0%
Lineage R Transcend R Superfinished Femoral Head	Prosthesis, hip, semi-constrained (metal cemented acetabular component)	108	0	0%
Conserve R Super Finish Femoral	Prosthesis, hip, femoral, resurfacing	99	0	0%
Profemur R Z Stem	Prosthesis, hip, semi-constrained, metal/polymer, porous uncemented	71	0	0%
Lineage R Transcend R Ceramic Femoral Head	Prosthesis, hip, semi-constrained, metal/ceramic/ceramic/metal, cemented or uncemented	70	0	0%
Femoral Head	Prosthesis, hip, semi-constrained, metal/polymer, porous uncemented	15	11	0%
Cocr Femoral Head	Prosthesis, hip, semi-constrained, metal/polymer, porous uncemented	8	4	0%
Unknown Cup	Prosthesis, hip, semi-constrained, metal/polymer, cemented	7	66	0.4%

Brands with a page on this site, ordered by report count for navigation only. FDA states that "MDR data alone cannot be used to establish rates of events, evaluate a change in event rates over time or compare event rates between devices. The number of reports cannot be interpreted or used in isolation to reach conclusions about the existence, severity, or frequency of problems associated with devices." It adds that the reporting system "has limitations, including the potential submission of incomplete, inaccurate, untimely, unverified, or biased data."

Device types

Product code	Device type	Reports	Share
KWA	Prosthesis, hip, semi-constrained (metal uncemented acetabular component)	3,424	25.8%
JDL	Prosthesis, hip, semi-constrained (metal cemented acetabular component)	1,969	14.8%
LZO	Prosthesis, hip, semi-constrained, metal/ceramic/polymer, cemented or non-porous, uncemented	1,416	10.7%
LWJ	Prosthesis, hip, semi-constrained, metal/polymer, uncemented	1,373	10.3%
JWH	Prosthesis, knee, patellofemorotibial, semi-constrained, cemented, polymer/metal/polymer	1,340	10.1%
LPH	Prosthesis, hip, semi-constrained, metal/polymer, porous uncemented	956	7.2%
HRY	Prosthesis, knee, femorotibial, semi-constrained, cemented, metal/polymer	907	6.8%
JDI	Prosthesis, hip, semi-constrained, metal/polymer, cemented	470	3.5%
MRA	Prosthesis, hip, semi-constrained, metal/ceramic/ceramic/metal, cemented or uncemented	172	1.3%
KXA	Prosthesis, hip, femoral, resurfacing	162	1.2%

Reports by month, five years

FDA releases MAUDE data monthly; reports can arrive months after an event, so the newest months grow in later releases.

Event type

Death0.1%14

Injury98.7%13,096

Malfunction0.8%111

Other0%3

Not given0.3%43

Grey bar: all 26,136,888 MAUDE reports. Event type is the filer's classification and is not verified by FDA.

Questions about Microport Orthopedics reports

How many FDA device reports name Microport Orthopedics as manufacturer?

13,267 reports through August 2026, 535 of them in the latest 12 months.

Which of its brands appear most often?

Conserve R Total A-Class Head (857), Conserve R Plus Cup (838), Profemur R Modular Femoral Neck (804), PROFEMUR Modular Femoral Neck (401) and Profemur R Cocr Neck (385).

Which device types does it report on?

prosthesis, hip, semi-constrained (metal uncemented acetabular component) (25.8%), prosthesis, hip, semi-constrained (metal cemented acetabular component) (14.8%), prosthesis, hip, semi-constrained, metal/ceramic/polymer, cemented or non-porous, uncemented (10.7%) and prosthesis, hip, semi-constrained, metal/polymer, uncemented (10.3%).

Does a high count say something about the manufacturer?

Not by itself. Manufacturers must file a report for every event they become aware of, so report volume follows the number of devices in use. FDA states that "MDR data alone cannot be used to establish rates of events, evaluate a change in event rates over time or compare event rates between devices. The number of reports cannot be interpreted or used in isolation to reach conclusions about the existence, severity, or frequency of problems associated with devices." It adds that the reporting system "has limitations, including the potential submission of incomplete, inaccurate, untimely, unverified, or biased data."

Where this comes from. Counts are built from the openFDA Device Adverse Event (MAUDE) bulk export released 28 Sep 2026, which holds reports FDA received through 31 Aug 2026. Brand, generic and manufacturer names are as written on the reports; product code names come from FDA's device classification. Manufacturer names are pooled after company suffixes (Inc., LLC, GmbH and similar) are dropped; names that read as a person rather than an organisation are never published. No report narrative, lot number, patient detail or reporter identity is published. See the methodology and sources; FDA's record is authoritative, and corrections are handled within five working days.

Drug data (FAERS) through 30 Jun 2026; device data (MAUDE) through 31 Aug 2026. Not medical advice.