Reported Reactions

Adverse event reports that FDA received

  • Search
  • Watch list

AMS 800 Urinary Control System with Inhibizone medical device reports that FDA received

Name type
Device brand name, as written on reports
Generic name
Device incontinence mechanical/hydraulic
Device type
Device, incontinence, mechanical/hydraulic (product code EZY)
Manufacturer given most often on reports
Boston Scientific

What a report is

A report is not proof that the device was the cause of the event.

FDA says:

Adverse event reports submitted to FDA do not undergo extensive validation or verification. Therefore, a causal relationship cannot be established between product and reactions listed in a report. While a suspected relationship may exist, it is not medically validated and should not be the sole source of information for clinical decision making or other assumptions about the safety or efficacy of a product. Additionally, it is important to remember that adverse event reports represent a small percentage of total usage numbers of a product. Common products may have a higher number of adverse events due to the higher total number of people using the product.

Source: openFDA, Device Adverse Event Overview, section "Responsible use of the data". The site read the page on . The data have the reports that FDA received through .

FDA also says:

Although MDRs are a valuable source of information, this passive surveillance system has limitations, including the potential submission of incomplete, inaccurate, untimely, unverified, or biased data. In addition, the incidence or prevalence of an event cannot be determined from this reporting system alone due to potential under-reporting of events and lack of information about frequency of device use.

Source: openFDA, Device Adverse Event Overview. The site read the page on .

MDR data alone cannot be used to establish rates of events, evaluate a change in event rates over time or compare event rates between devices. The number of reports cannot be interpreted or used in isolation to reach conclusions about the existence, severity, or frequency of problems associated with devices.

Source: openFDA, Manufacturer and User Facility Device Experience. The site read the page on .

Do not rely on openFDA to make decisions regarding medical care. While we make every effort to ensure that data is accurate, you should assume all results are unvalidated.

Source: openFDA, Response of the drug event API (meta.disclaimer). The site read the page on .

Not medical advice. This site counts what was reported to FDA. Questions about a medicine or device belong with a pharmacist or clinician.

Reports on file

From October 2018 to November 2024, FDA received 4,185 medical device reports that name the brand AMS 800 Urinary Control System with Inhibizone. A brand name is as the reporter or the manufacturer wrote it, so one product can have more than one spelling.

FDA received 0 reports in the 12 months to September 2026 and 69 in the 12 months before. FDA releases MAUDE data every month. Reports can arrive months after an event, so the newest months grow in later releases.

Manufacturer reports were 100% of the reports that name this brand and 94.9% of all device reports.

The number of people who use the product is not in the data. A count is not a rate. A count of reports is not a count of events or of patients, because one event can have more than one report.

What an MDR is

A medical device report: one submission to FDA about one event. It has the brand name, the generic name, the manufacturer, the product code, the event type and coded problems. Manufacturers and user facilities must send reports.

Data version

openFDA MAUDE release of 23 Oct 2026. Reports received through 30 Sep 2026.

Since the last update

FDA says:

MDR data alone cannot be used to establish rates of events, evaluate a change in event rates over time or compare event rates between devices. The number of reports cannot be interpreted or used in isolation to reach conclusions about the existence, severity, or frequency of problems associated with devices.

Source: openFDA, Manufacturer and User Facility Device Experience. The site read the page on .

The latest update of the FDA data, recorded on , changed no count of this page.

FDA received no report that names AMS 800 Urinary Control System with Inhibizone in April to June 2026, in January to March 2026 or in April to June 2025.

April to June 2026 is the latest closed quarter in the data. A closed quarter is a quarter for which the FDA files have most of the reports.

All updatesFeed of updates (RSS)

Event types by year

The event type is the classification that the reporter gave. The four terms are FDA's.

FDA says:

MDR data alone cannot be used to establish rates of events, evaluate a change in event rates over time or compare event rates between devices. The number of reports cannot be interpreted or used in isolation to reach conclusions about the existence, severity, or frequency of problems associated with devices.

Source: openFDA, Manufacturer and User Facility Device Experience. The site read the page on .

Reports that name AMS 800 Urinary Control System with Inhibizone, by event type and by the year in which FDA received them

The table continues to the right.

YearReportsDeathInjuryMalfunctionOtherNot given
201813601211500
201946104362500
202044004211900
202181108011000
20227900784600
202380817971000
202473907231600

An event type in a report is not proof that the device was the cause. FDA does not verify the event type.

Malfunction

A malfunction report says that the device did not do what it was made to do. It can be with or without harm to a person.

Reports by month

Reports that name AMS 800 Urinary Control System with Inhibizone, by month, five years to September 2026
010020020222023202420252026

FDA releases MAUDE data every month. Reports can arrive months after an event, so the newest months grow in later releases.

Event type and report source

Event type in all reports that name AMS 800 Urinary Control System with Inhibizone
Event typeReportsShareShare as a bar
Death1under 0.1%
Injury4,08397.6%
Malfunction1012.4%
Other00%
Not given00%
Source of the reports that name AMS 800 Urinary Control System with Inhibizone
Report sourceReportsShareShare as a bar
Manufacturer report4,185100%
Voluntary report00%
User facility report00%
Distributor report00%
Not given00%

Each share is of the 4,185 reports that name this brand, not of the devices in use.

Device problems coded

Device problem codes in the reports that name AMS 800 Urinary Control System with Inhibizone
Device problem (FDA code)ReportsShare
Mechanical problema mechanical problem86420.6%
Fluid/blood leak80919.3%
Insufficient device problem information79819.1%
Inadequacy of device shape and/or size51312.3%
Material puncture/hole3889.3%
Defective devicethe device was defective1383.3%
Malposition of device1152.7%
Migrationthe device moved from where it was placed932.2%
Inflation problem832%
Failure to cycle260.6%
Difficult or delayed activation240.6%
Air/gas in device190.5%
Deflation problem190.5%
Decrease in pressure110.3%
Disconnection100.2%
Material deformation90.2%
Device contamination with chemical or other material80.2%
Device remains activated60.1%
Material discolored50.1%
Contamination40.1%

These are the device problem codes of FDA, as written on the report. One report can have more than one code. The table leaves out general codes such as "no apparent adverse event".

Patient problems coded

Patient problem codes in the reports that name AMS 800 Urinary Control System with Inhibizone
Patient problem (FDA code)ReportsShare
Urinary incontinenceleaking urine1,81143.3%
Incontinence62514.9%
Erosion57213.7%
Tissue damage2195.2%
Urinary retentionbeing unable to empty the bladder1393.3%
Painpain, site not specified932.2%
Discomfortdiscomfort421%
Perforation401%
Swelling/ edema300.7%
Dysuriapain on passing urine260.6%
Hematuria250.6%
Hematomaa collection of blood under the skin or in tissue180.4%
Inflammationinflammation150.4%
Scar tissue130.3%
Urethral stenosis/stricture110.3%

Patient problem codes are mainly in reports sent since 2019, and the field is often empty.

Pages near this one

These links are for navigation. No count selected them. The page of the device type lists each brand name with product code EZY.

Official pages

The site checked these addresses on . The links open in a new tab.

Cite this page

Reported Reactions. AMS 800 Urinary Control System with Inhibizone: medical device reports that FDA received. https://reportedreactions.com/device/ams-800-urinary-control-system-with-inhibizone/ Source: U.S. Food and Drug Administration, openFDA Device Adverse Event (MAUDE) files, release of . Reports received through .

Where the data come from

The counts come from the openFDA Device Adverse Event (MAUDE) bulk files, release of 23 Oct 2026. The files have the reports that FDA received through 30 Sep 2026. Brand names, generic names and manufacturer names are as written on the reports. The names of the product codes come from the device classification of FDA.

A report is in the count when a device in it has this brand name, after the site removes differences of punctuation and capital letters. The site does not publish a report narrative, a lot number, a detail of a patient or the identity of a reporter. The record of FDA is the authority. See how the site counts reports, the data sources and the corrections page.

Questions

Do these reports show that AMS 800 Urinary Control System with Inhibizone was at fault?

No. FDA says:

The submission of an MDR itself does not necessarily demonstrate that the device caused or contributed to the adverse outcome or event.

Source: FDA Center for Devices and Radiological Health, About Manufacturer and User Facility Device Experience (MAUDE) Database. Content current as of . The site read the page on .

Confirming whether a device actually caused a specific event can be difficult based solely on information provided in a given report.

Source: openFDA, Manufacturer and User Facility Device Experience. The site read the page on .

What event types do the reports record?

Death (1), injury (4,083) and malfunction (101). The event type is the classification that the reporter gave: death, injury, malfunction or other. FDA does not verify it.

Who sent these reports?

Manufacturer reports (100%). These are the sources of the reports that name this brand.

Some reports come directly from user facilities (like hospitals) or device importers (distributors), while others come directly from manufacturers.

Source: openFDA, Device Adverse Event Overview. The site read the page on .

How does a person report a problem with a medical device?

FDA runs MedWatch, a program that takes voluntary reports about medical devices. The guide on how to report has the links.