Reported Reactions

Adverse event reports that FDA received

  • Search
  • Watch list

Acuity medical device reports that FDA received

Name type
Device brand name, as written on reports
Generic name
Implantable lead
Device type
Implantable pulse generator, pacemaker (non-crt) (product code LWP)
Manufacturer given most often on reports
Cpi - Del Caribe

What a report is

A report is not proof that the device was the cause of the event.

FDA says:

Adverse event reports submitted to FDA do not undergo extensive validation or verification. Therefore, a causal relationship cannot be established between product and reactions listed in a report. While a suspected relationship may exist, it is not medically validated and should not be the sole source of information for clinical decision making or other assumptions about the safety or efficacy of a product. Additionally, it is important to remember that adverse event reports represent a small percentage of total usage numbers of a product. Common products may have a higher number of adverse events due to the higher total number of people using the product.

Source: openFDA, Device Adverse Event Overview, section "Responsible use of the data". The site read the page on . The data have the reports that FDA received through .

FDA also says:

Although MDRs are a valuable source of information, this passive surveillance system has limitations, including the potential submission of incomplete, inaccurate, untimely, unverified, or biased data. In addition, the incidence or prevalence of an event cannot be determined from this reporting system alone due to potential under-reporting of events and lack of information about frequency of device use.

Source: openFDA, Device Adverse Event Overview. The site read the page on .

MDR data alone cannot be used to establish rates of events, evaluate a change in event rates over time or compare event rates between devices. The number of reports cannot be interpreted or used in isolation to reach conclusions about the existence, severity, or frequency of problems associated with devices.

Source: openFDA, Manufacturer and User Facility Device Experience. The site read the page on .

Do not rely on openFDA to make decisions regarding medical care. While we make every effort to ensure that data is accurate, you should assume all results are unvalidated.

Source: openFDA, Response of the drug event API (meta.disclaimer). The site read the page on .

Not medical advice. This site counts what was reported to FDA. Questions about a medicine or device belong with a pharmacist or clinician.

Reports on file

From February 2008 to July 2026, FDA received 3,848 medical device reports that name the brand Acuity. A brand name is as the reporter or the manufacturer wrote it, so one product can have more than one spelling.

FDA received 5 reports in the 12 months to September 2026 and 2 in the 12 months before. FDA releases MAUDE data every month. Reports can arrive months after an event, so the newest months grow in later releases.

Of the 3,444,740 device reports that FDA received in the 12 months to September 2026, 5 (under 0.1%) name the brand Acuity. Manufacturer reports were 99.9% of the reports that name this brand and 94.9% of all device reports.

The number of people who use the product is not in the data. A count is not a rate. A count of reports is not a count of events or of patients, because one event can have more than one report.

What an MDR is

A medical device report: one submission to FDA about one event. It has the brand name, the generic name, the manufacturer, the product code, the event type and coded problems. Manufacturers and user facilities must send reports.

Data version

openFDA MAUDE release of 23 Oct 2026. Reports received through 30 Sep 2026.

Since the last update

FDA says:

MDR data alone cannot be used to establish rates of events, evaluate a change in event rates over time or compare event rates between devices. The number of reports cannot be interpreted or used in isolation to reach conclusions about the existence, severity, or frequency of problems associated with devices.

Source: openFDA, Manufacturer and User Facility Device Experience. The site read the page on .

The latest update of the FDA data, recorded on , changed no count of this page.

  • In April to June 2026, FDA received 0 reports that name the brand Acuity.
  • In January to March 2026, FDA received 1.
  • In April to June 2025, FDA received 0.

April to June 2026 is the latest closed quarter in the data. A closed quarter is a quarter for which the FDA files have most of the reports.

All updatesFeed of updates (RSS)

Event types by year

The event type is the classification that the reporter gave. The four terms are FDA's.

FDA says:

MDR data alone cannot be used to establish rates of events, evaluate a change in event rates over time or compare event rates between devices. The number of reports cannot be interpreted or used in isolation to reach conclusions about the existence, severity, or frequency of problems associated with devices.

Source: openFDA, Manufacturer and User Facility Device Experience. The site read the page on .

Reports that name Acuity, by event type and by the year in which FDA received them

The table continues to the right.

YearReportsDeathInjuryMalfunctionOtherNot given
20081406800
201017211333710
2011542643310300
201239643019010
201332042506600
201429342246500
201526042035300
2016407428212100
20176831145721500
2018751256018900
2023300300
2025402200
2026302100

An event type in a report is not proof that the device was the cause. FDA does not verify the event type.

Malfunction

A malfunction report says that the device did not do what it was made to do. It can be with or without harm to a person.

Reports by month

Reports that name Acuity, by month, five years to September 2026
03520222023202420252026

FDA releases MAUDE data every month. Reports can arrive months after an event, so the newest months grow in later releases.

Event type and report source

Event type in all reports that name Acuity
Event typeReportsShareShare as a bar
Death401%
Injury2,85374.1%
Malfunction95324.8%
Other20.1%
Not given00%
Source of the reports that name Acuity
Report sourceReportsShareShare as a bar
Manufacturer report3,84599.9%
Voluntary report30.1%
User facility report00%
Distributor report00%
Not given00%

Each share is of the 3,848 reports that name this brand, not of the devices in use.

Device problems coded

Device problem codes in the reports that name Acuity
Device problem (FDA code)ReportsShare
Device dislodged or dislocated1,60041.6%
Failure to capture99825.9%
High impedance54414.1%
Capturing problem3168.2%
Extracardiac stimulation3168.2%
Insufficient device problem information2927.6%
Material integrity problema problem with the device material2747.1%
Fracturea broken bone1915%
Difficult to position1353.5%
Pacing problem1143%
Device operates differently than expectedthe device behaved unexpectedly1102.9%
Device sensing problem1072.8%
Over-sensing751.9%
Human-device interface problem601.6%
Low impedance601.6%
Ambient noise problem350.9%
Impedance problem290.8%
Connection problema connection problem240.6%
Migration or expulsion of device200.5%
Device contamination with biological material190.5%

These are the device problem codes of FDA, as written on the report. One report can have more than one code. The table leaves out general codes such as "no apparent adverse event".

Patient problems coded

Patient problem codes in the reports that name Acuity
Patient problem (FDA code)ReportsShare
Sepsisa severe body-wide response to infection2386.2%
Muscle stimulation1493.9%
Complaint, ill-defined852.2%
Pocket erosion792.1%
Surgical procedure, repeated601.6%
Other (for use when an appropriate patient code cannot be identified)571.5%
Twiddlers syndrome571.5%
Deaththe patient died; cause not stated by this term411.1%
Erosion391%
Endocarditis360.9%
Heart failure360.9%
Hematomaa collection of blood under the skin or in tissue350.9%
Staphylococcus aureus270.7%
Pericardial effusionfluid around the heart250.6%
Atrial fibrillationan irregular heart rhythm240.6%

Patient problem codes are mainly in reports sent since 2019, and the field is often empty.

Pages near this one

These links are for navigation. No count selected them. The page of the device type lists each brand name with product code LWP.

Official pages

The site checked these addresses on . The links open in a new tab.

Cite this page

Reported Reactions. Acuity: medical device reports that FDA received. https://reportedreactions.com/device/acuity/ Source: U.S. Food and Drug Administration, openFDA Device Adverse Event (MAUDE) files, release of . Reports received through .

Where the data come from

The counts come from the openFDA Device Adverse Event (MAUDE) bulk files, release of 23 Oct 2026. The files have the reports that FDA received through 30 Sep 2026. Brand names, generic names and manufacturer names are as written on the reports. The names of the product codes come from the device classification of FDA.

A report is in the count when a device in it has this brand name, after the site removes differences of punctuation and capital letters. The site does not publish a report narrative, a lot number, a detail of a patient or the identity of a reporter. The record of FDA is the authority. See how the site counts reports, the data sources and the corrections page.

Questions

Do these reports show that Acuity was at fault?

No. FDA says:

The submission of an MDR itself does not necessarily demonstrate that the device caused or contributed to the adverse outcome or event.

Source: FDA Center for Devices and Radiological Health, About Manufacturer and User Facility Device Experience (MAUDE) Database. Content current as of . The site read the page on .

Confirming whether a device actually caused a specific event can be difficult based solely on information provided in a given report.

Source: openFDA, Manufacturer and User Facility Device Experience. The site read the page on .

What event types do the reports record?

Death (40), injury (2,853), malfunction (953) and other (2). The event type is the classification that the reporter gave: death, injury, malfunction or other. FDA does not verify it.

Who sent these reports?

Manufacturer reports (99.9%) and voluntary reports (0.1%). These are the sources of the reports that name this brand.

Some reports come directly from user facilities (like hospitals) or device importers (distributors), while others come directly from manufacturers.

Source: openFDA, Device Adverse Event Overview. The site read the page on .

How does a person report a problem with a medical device?

FDA runs MedWatch, a program that takes voluntary reports about medical devices. The guide on how to report has the links.