Device brand name · Fall prevention alarm/sensor combination attached or unattached

Sitter Select: medical device reports filed with FDA

466 reports name it, 2008–2017. Manufacturer given most often on reports: J T Posey. Product code KMI.

Read first · FDA's statement on these data

Adverse event reports submitted to FDA do not undergo extensive validation or verification. Therefore, a causal relationship cannot be established between product and reactions listed in a report. While a suspected relationship may exist, it is not medically validated and should not be the sole source of information for clinical decision making or other assumptions about the safety or efficacy of a product. Additionally, it is important to remember that adverse event reports represent a small percentage of total usage numbers of a product. Common products may have a higher number of adverse events due to the higher total number of people using the product. openFDA, FDA

FDA adds: "Although MDRs are a valuable source of information, this passive surveillance system has limitations, including the potential submission of incomplete, inaccurate, untimely, unverified, or biased data. In addition, the incidence or prevalence of an event cannot be determined from this reporting system alone due to potential under-reporting of events and lack of information about frequency of device use." And: "MDR data alone cannot be used to establish rates of events, evaluate a change in event rates over time or compare event rates between devices. The number of reports cannot be interpreted or used in isolation to reach conclusions about the existence, severity, or frequency of problems associated with devices."

Do not rely on openFDA to make decisions regarding medical care. While we make every effort to ensure that data is accurate, you should assume all results are unvalidated.

Not medical advice. This site counts what was reported to FDA. Questions about a medicine or device belong with a pharmacist or clinician.

466
device reports naming the brand: 0% of all MAUDE reports · about 27 a year; 0
reports, 12 months to August 2026: 0 in the 12 months before; 97%
classified as malfunction: 85.8% across the product code; 0.4%
classified as death, as reported: 2 reports · not verified by FDA

FDA's MAUDE database holds 466 reports that name the brand "Sitter Select" (fall prevention alarm/sensor combination attached or unattached), received between December 2008 and July 2017; the manufacturer given most often on reports is J T Posey. Spellings of one product vary from report to report.

0 reports arrived in the 12 months to August 2026, and none in the 12 months before. FDA releases MAUDE data monthly; reports can arrive months after an event, so the newest months grow in later releases. The event types recorded are malfunction (97%), injury (1.9%) and death (0.4%); across all monitor, bed patient reports (product code KMI) death is recorded in 2.5% and malfunction in 85.8%. Event type is the reporter's classification of the report, not a verified outcome.

The device problems coded most often are device alarm system (33.7%), failure to power up (16.3%) and no audible alarm (9.2%). The patient problems coded most often are no patient involvement, fall and hip fracture. FDA states that "MDR data alone cannot be used to establish rates of events, evaluate a change in event rates over time or compare event rates between devices. The number of reports cannot be interpreted or used in isolation to reach conclusions about the existence, severity, or frequency of problems associated with devices." It adds that the reporting system "has limitations, including the potential submission of incomplete, inaccurate, untimely, unverified, or biased data."

Reports by month, five years

No report naming Sitter Select was received in the five years to August 2026; the latest was received in July 2017.

By year received

Event type and report source

Event type, as classified on the report

Death0.4%2

Injury1.9%9

Malfunction97%452

Other0.4%2

Not given0.2%1

Who filed the report

Manufacturer report99.6%464

Voluntary report0%0

User facility report0%0

Distributor report0%0

Not given0.4%2

Grey bar: all 3,250 reports carrying product code KMI. Event type is the filer's classification and is not verified by FDA.

Device problems coded

Device problem (FDA code)	Reports	Share	Share across product code
Device alarm system	157	33.7%	35.8%
Failure to power up	76	16.3%	8.6%
No audible alarm	43	9.2%	11.1%
Loss of powerthe device lost power	32	6.9%	3.2%
Alarm, intermittent	27	5.8%	4.2%
Other (for use when an appropriate device code cannot be identified)	18	3.9%	3.8%
Component missing	16	3.4%	1.5%
Device operates differently than expectedthe device behaved unexpectedly	12	2.6%	2.3%
Battery problema problem with the battery	8	1.7%	1%
Low audible alarm	7	1.5%	0.6%
Bent	6	1.3%	0.3%
Device sensing problem	6	1.3%	0.5%
Device stops intermittentlythe device stopped now and then	6	1.3%	1.2%
Device inoperablethe device could not be used	5	1.1%	0.5%
Loose or intermittent connection	5	1.1%	1.6%
Device slipped	4	0.9%	0.4%
False alarm	4	0.9%	1.8%
Power problem	4	0.9%	0.4%
Breakthe device broke	3	0.6%	3.2%
Detachment of device component	3	0.6%	0.3%

FDA's device problem codes as entered on the report; one report can carry several. Generic codes such as "no apparent adverse event" are left out.

Patient problems coded

Patient problem (FDA code)	Reports	Share
No patient involvement	35	7.5%
Falla fall	15	3.2%
Hip fracturea broken hip	5	1.1%
Deaththe patient died; cause not stated by this term	2	0.4%
Head injurya head injury	2	0.4%
Abrasion	1	0.2%
Bone fracture(s)	1	0.2%
Bruise/contusion	1	0.2%
Hematomaa collection of blood under the skin or in tissue	1	0.2%

Patient problem codes are present mainly in reports filed since 2019 and are often blank.

In context

Measure	Sitter Select	Product code KMI	All MAUDE reports
Reports	466	3,250	26,136,888
Share of that pool	—	14.3%	0%
Classified as death, per 1,000 reports	4	25	9
Classified as injury	1.9%	9%	36.2%
Classified as malfunction	97%	85.8%	62.3%
Filed by the manufacturer	99.6%	87.4%	94.9%

Shares are of reports, not of devices in use. FDA states that "MDR data alone cannot be used to establish rates of events, evaluate a change in event rates over time or compare event rates between devices. The number of reports cannot be interpreted or used in isolation to reach conclusions about the existence, severity, or frequency of problems associated with devices." It adds that the reporting system "has limitations, including the potential submission of incomplete, inaccurate, untimely, unverified, or biased data."

Other brands with product code KMI

Brand	Reports	Latest 12 months	Classified as death
Posey Keepsafe Deluxe	262	0	0%
Keepsafe Deluxe	317	0	0%
Sitter Elite	308	2	1%
Cubby Beds	188	106	0.5%
Deroyal	587	14	0.7%

Ordered by report count for navigation only. FDA states that "MDR data alone cannot be used to establish rates of events, evaluate a change in event rates over time or compare event rates between devices. The number of reports cannot be interpreted or used in isolation to reach conclusions about the existence, severity, or frequency of problems associated with devices." It adds that the reporting system "has limitations, including the potential submission of incomplete, inaccurate, untimely, unverified, or biased data." FDA also states that "common products may have a higher number of adverse events due to the higher total number of people using the product."

Questions about Sitter Select reports

How many FDA reports name Sitter Select?

466 medical device reports in the openFDA MAUDE release of 28 Sep 2026, covering reports received through August 2026; 0 in the latest 12 months.

What kinds of events are reported?

malfunction (97%), injury (1.9%) and death (0.4%). "Event type" is how the report was classified when filed: death, injury, malfunction or other.

What device problems are coded?

device alarm system (33.7%), failure to power up (16.3%), no audible alarm (9.2%), loss of power (6.9%) and alarm, intermittent (5.8%). These are FDA's device problem codes as entered on the report.

Who files these reports?

manufacturer reports (99.6%). Manufacturers and user facilities are required to report; voluntary reports come from health professionals and the public.

Do these reports show that Sitter Select was at fault?

No. FDA states that "MDR data alone cannot be used to establish rates of events, evaluate a change in event rates over time or compare event rates between devices. The number of reports cannot be interpreted or used in isolation to reach conclusions about the existence, severity, or frequency of problems associated with devices." It adds that the reporting system "has limitations, including the potential submission of incomplete, inaccurate, untimely, unverified, or biased data." FDA adds that "a causal relationship cannot be established between product and reactions listed in a report."

How do I report a problem with a medical device?

Through FDA MedWatch (Form FDA 3500 for health professionals and consumers), or to the manufacturer. See the guide on how to report.

Where this comes from. Counts are built from the openFDA Device Adverse Event (MAUDE) bulk export released 28 Sep 2026, which holds reports FDA received through 31 Aug 2026. Brand, generic and manufacturer names are as written on the reports; product code names come from FDA's device classification. A report counts here when any device it lists carries this brand name after punctuation and capitalisation are normalised. No report narrative, lot number, patient detail or reporter identity is published. See the methodology and sources; FDA's record is authoritative, and corrections are handled within five working days.

Drug data (FAERS) through 30 Jun 2026; device data (MAUDE) through 31 Aug 2026. Not medical advice.