Reported Reactions

Adverse event reports that FDA received

  • Search
  • Watch list

RotaWire and wireClip Torquer medical device reports that FDA received

Name type
Device brand name, as written on reports
Generic name
Catheter coronary atherectomy
Device type
Catheter, coronary, atherectomy (product code MCX)
Manufacturer given most often on reports
Boston Scientific

What a report is

A report is not proof that the device was the cause of the event.

FDA says:

Adverse event reports submitted to FDA do not undergo extensive validation or verification. Therefore, a causal relationship cannot be established between product and reactions listed in a report. While a suspected relationship may exist, it is not medically validated and should not be the sole source of information for clinical decision making or other assumptions about the safety or efficacy of a product. Additionally, it is important to remember that adverse event reports represent a small percentage of total usage numbers of a product. Common products may have a higher number of adverse events due to the higher total number of people using the product.

Source: openFDA, Device Adverse Event Overview, section "Responsible use of the data". The site read the page on . The data have the reports that FDA received through .

FDA also says:

Although MDRs are a valuable source of information, this passive surveillance system has limitations, including the potential submission of incomplete, inaccurate, untimely, unverified, or biased data. In addition, the incidence or prevalence of an event cannot be determined from this reporting system alone due to potential under-reporting of events and lack of information about frequency of device use.

Source: openFDA, Device Adverse Event Overview. The site read the page on .

MDR data alone cannot be used to establish rates of events, evaluate a change in event rates over time or compare event rates between devices. The number of reports cannot be interpreted or used in isolation to reach conclusions about the existence, severity, or frequency of problems associated with devices.

Source: openFDA, Manufacturer and User Facility Device Experience. The site read the page on .

Do not rely on openFDA to make decisions regarding medical care. While we make every effort to ensure that data is accurate, you should assume all results are unvalidated.

Source: openFDA, Response of the drug event API (meta.disclaimer). The site read the page on .

Not medical advice. This site counts what was reported to FDA. Questions about a medicine or device belong with a pharmacist or clinician.

Reports on file

From June 2011 to September 2026, FDA received 1,467 medical device reports that name the brand RotaWire and wireClip Torquer. A brand name is as the reporter or the manufacturer wrote it, so one product can have more than one spelling.

FDA received 83 reports in the 12 months to September 2026 and 73 in the 12 months before. FDA releases MAUDE data every month. Reports can arrive months after an event, so the newest months grow in later releases.

Of the 3,444,740 device reports that FDA received in the 12 months to September 2026, 83 (under 0.1%) name the brand RotaWire and wireClip Torquer. Manufacturer reports were 98.9% of the reports that name this brand and 94.9% of all device reports.

The number of people who use the product is not in the data. A count is not a rate. A count of reports is not a count of events or of patients, because one event can have more than one report.

What an MDR is

A medical device report: one submission to FDA about one event. It has the brand name, the generic name, the manufacturer, the product code, the event type and coded problems. Manufacturers and user facilities must send reports.

Data version

openFDA MAUDE release of 23 Oct 2026. Reports received through 30 Sep 2026.

Since the last update

FDA says:

MDR data alone cannot be used to establish rates of events, evaluate a change in event rates over time or compare event rates between devices. The number of reports cannot be interpreted or used in isolation to reach conclusions about the existence, severity, or frequency of problems associated with devices.

Source: openFDA, Manufacturer and User Facility Device Experience. The site read the page on .

The latest update of the FDA data, recorded on , changed no count of this page.

  • In April to June 2026, FDA received 24 reports that name the brand RotaWire and wireClip Torquer.
  • In January to March 2026, FDA received 10.
  • In April to June 2025, FDA received 18.

April to June 2026 is the latest closed quarter in the data. A closed quarter is a quarter for which the FDA files have most of the reports.

All updatesFeed of updates (RSS)

Event types by year

The event type is the classification that the reporter gave. The four terms are FDA's.

FDA says:

MDR data alone cannot be used to establish rates of events, evaluate a change in event rates over time or compare event rates between devices. The number of reports cannot be interpreted or used in isolation to reach conclusions about the existence, severity, or frequency of problems associated with devices.

Source: openFDA, Manufacturer and User Facility Device Experience. The site read the page on .

Reports that name RotaWire and wireClip Torquer, by event type and by the year in which FDA received them

The table continues to the right.

YearReportsDeathInjuryMalfunctionOtherNot given
2011300300
2012300300
2013411200
2014580243400
20151295408400
20161556658400
20171202447400
20181424469200
201915574310500
20201635609800
20211506479700
2022938147100
2023702194900
2024854206100
2025824166200
2026552134000

An event type in a report is not proof that the device was the cause. FDA does not verify the event type.

Malfunction

A malfunction report says that the device did not do what it was made to do. It can be with or without harm to a person.

Reports by month

Reports that name RotaWire and wireClip Torquer, by month, five years to September 2026
0102020222023202420252026

FDA releases MAUDE data every month. Reports can arrive months after an event, so the newest months grow in later releases.

Event type and report source

Event type in all reports that name RotaWire and wireClip Torquer
Event typeReportsShareShare as a bar
Death563.8%
Injury45230.8%
Malfunction95965.4%
Other00%
Not given00%
Source of the reports that name RotaWire and wireClip Torquer
Report sourceReportsShareShare as a bar
Manufacturer report1,45198.9%
Voluntary report00%
User facility report00%
Distributor report00%
Not given161.1%

Each share is of the 1,467 reports that name this brand, not of the devices in use.

Device problems coded

Device problem codes in the reports that name RotaWire and wireClip Torquer
Device problem (FDA code)ReportsShare
Entrapment of device53536.5%
Fracturea broken bone35123.9%
Detachment of device or device componentpart of the device came off16010.9%
Material deformation996.7%
Detachment of device component785.3%
Difficult to removethe device was hard to remove724.9%
Difficult to advance543.7%
Device contamination with chemical or other material483.3%
Kinkedthe tube or line kinked402.7%
Failure to advance302%
Material integrity problema problem with the device material241.6%
Nonstandard device221.5%
Device damaged by another device181.2%
Device damaged prior to usethe device was damaged before use130.9%
Deformation due to compressive stress120.8%
Positioning problem120.8%
Stretched120.8%
Breakthe device broke80.5%
Material twisted/bent80.5%
Physical resistance/sticking70.5%

These are the device problem codes of FDA, as written on the report. One report can have more than one code. The table leaves out general codes such as "no apparent adverse event".

Patient problems coded

Patient problem codes in the reports that name RotaWire and wireClip Torquer
Patient problem (FDA code)ReportsShare
Device embedded in tissue or plaque19413.2%
Foreign body in patientpart of a device left in the patient755.1%
Perforation of vessels735%
No patient involvement493.3%
Deaththe patient died; cause not stated by this term322.2%
Perforation271.8%
Vascular dissection251.7%
Low blood pressure/ hypotension181.2%
Cardiac arrestthe heart stopped120.8%
Chest painchest pain120.8%
Pericardial effusionfluid around the heart100.7%
Cardiac tamponade90.6%
Bradycardiaslow heart rate80.5%
Hematomaa collection of blood under the skin or in tissue60.4%
Cardiac perforation50.3%

Patient problem codes are mainly in reports sent since 2019, and the field is often empty.

Pages near this one

These links are for navigation. No count selected them. The page of the device type lists each brand name with product code MCX.

Official pages

The site checked these addresses on . The links open in a new tab.

Cite this page

Reported Reactions. RotaWire and wireClip Torquer: medical device reports that FDA received. https://reportedreactions.com/device/rotawire-and-wireclip-torquer/ Source: U.S. Food and Drug Administration, openFDA Device Adverse Event (MAUDE) files, release of . Reports received through .

Where the data come from

The counts come from the openFDA Device Adverse Event (MAUDE) bulk files, release of 23 Oct 2026. The files have the reports that FDA received through 30 Sep 2026. Brand names, generic names and manufacturer names are as written on the reports. The names of the product codes come from the device classification of FDA.

A report is in the count when a device in it has this brand name, after the site removes differences of punctuation and capital letters. The site does not publish a report narrative, a lot number, a detail of a patient or the identity of a reporter. The record of FDA is the authority. See how the site counts reports, the data sources and the corrections page.

Questions

Do these reports show that RotaWire and wireClip Torquer was at fault?

No. FDA says:

The submission of an MDR itself does not necessarily demonstrate that the device caused or contributed to the adverse outcome or event.

Source: FDA Center for Devices and Radiological Health, About Manufacturer and User Facility Device Experience (MAUDE) Database. Content current as of . The site read the page on .

Confirming whether a device actually caused a specific event can be difficult based solely on information provided in a given report.

Source: openFDA, Manufacturer and User Facility Device Experience. The site read the page on .

What event types do the reports record?

Death (56), injury (452) and malfunction (959). The event type is the classification that the reporter gave: death, injury, malfunction or other. FDA does not verify it.

Who sent these reports?

Manufacturer reports (98.9%). These are the sources of the reports that name this brand.

Some reports come directly from user facilities (like hospitals) or device importers (distributors), while others come directly from manufacturers.

Source: openFDA, Device Adverse Event Overview. The site read the page on .

How does a person report a problem with a medical device?

FDA runs MedWatch, a program that takes voluntary reports about medical devices. The guide on how to report has the links.