Devices › Device types
FDA product code JIT · class 2 · Clinical Chemistry
Calibrator, secondary: medical device reports filed with FDA
363 reports carry this product code, 2000–2026; 5 brands with a page.
- 363
- reports with this product code
- 0% of all MAUDE reports
- 2
- reports, 12 months to August 2026
- 20 in the 12 months before
- 97.8%
- classified as malfunction
- 62.3% across all reports
- 0%
- classified as death, as reported
- 0.9% across all reports
Product code JIT is FDA's classification for "Calibrator, secondary" (clinical Chemistry panel), a class 2 device. 363 medical device reports carry this product code, 0% of the MAUDE database, from April 2000 to August 2026.
2 reports arrived in the 12 months to August 2026, down 90% from 20 in the 12 months before. FDA releases MAUDE data monthly; reports can arrive months after an event, so the newest months grow in later releases. The event types recorded are malfunction (97.8%) and injury (2.2%). 5 brand names with a page on this site carry this code; the brands table is ordered by report count for navigation only. FDA states that "MDR data alone cannot be used to establish rates of events, evaluate a change in event rates over time or compare event rates between devices. The number of reports cannot be interpreted or used in isolation to reach conclusions about the existence, severity, or frequency of problems associated with devices." It adds that the reporting system "has limitations, including the potential submission of incomplete, inaccurate, untimely, unverified, or biased data."
Brands with this product code
| Brand | Reports | Latest 12 months | Classified as death | Classified as malfunction |
|---|---|---|---|---|
| Architect Bnp Calibrators | 210 | 0 | 0% | 100% |
| Dimension R Clinical Chemistry System | 51 | 0 | 0% | 99.5% |
| Dimension | 2 | 40 | 0.1% | 98.5% |
| Dimension Vista Clinical Chemistry System | 1 | 0 | 0.2% | 99.4% |
| Vitros Immunodiagnostic Products Intact Pth Reagent Pack | 1 | 3 | 0% | 100% |
Ordered by report count for navigation only. FDA states that "MDR data alone cannot be used to establish rates of events, evaluate a change in event rates over time or compare event rates between devices. The number of reports cannot be interpreted or used in isolation to reach conclusions about the existence, severity, or frequency of problems associated with devices." It adds that the reporting system "has limitations, including the potential submission of incomplete, inaccurate, untimely, unverified, or biased data."
Manufacturers named
| Manufacturer (as written on reports) | Reports | Share |
|---|---|---|
| Abbott Laboratories | 113 | 31.1% |
| Abbott Germany | 94 | 25.9% |
| Siemens Healthcare Diagnostics - Glasgow | 60 | 16.5% |
| Ortho-Clinical Diagnostics | 17 | 4.7% |
| Beckman Coulter | 2 | 0.6% |
| Dade Behring | 2 | 0.6% |
Reports by month, five years
FDA releases MAUDE data monthly; reports can arrive months after an event, so the newest months grow in later releases.
Event type and report source
Event type
Who filed
Grey bar: all 26,136,888 MAUDE reports.
Device problems coded
| Device problem (FDA code) | Reports | Share |
|---|---|---|
| High test results | 263 | 72.5% |
| Calibration problem | 39 | 10.7% |
| Low test results | 37 | 10.2% |
| Device operates differently than expectedthe device behaved unexpectedly | 9 | 2.5% |
| Incorrect, inadequate or imprecise result or readings | 9 | 2.5% |
| Nonstandard device | 9 | 2.5% |
| Calibration error | 5 | 1.4% |
| Incorrect or inadequate test results | 4 | 1.1% |
| Crackthe device cracked | 3 | 0.8% |
| Failure to calibrate | 3 | 0.8% |
| Device ingredient or reagent problem | 2 | 0.6% |
| Other (for use when an appropriate device code cannot be identified) | 2 | 0.6% |
| Structural problem | 2 | 0.6% |
| Device issuea problem with the device | 1 | 0.3% |
| Device packaging compromised | 1 | 0.3% |
| Difficult to removethe device was hard to remove | 1 | 0.3% |
| False negative result | 1 | 0.3% |
| Fluid/blood leak | 1 | 0.3% |
| High readingsreadings were too high | 1 | 0.3% |
| Insufficient device problem information | 1 | 0.3% |
Questions about calibrator, secondary reports
What is product code JIT?
FDA's classification code for "Calibrator, secondary", class 2, reviewed by the clinical Chemistry panel. Every device report carries the product code of the device involved.
How many reports carry this code?
363 reports through August 2026, 2 of them in the latest 12 months.
Which brands appear most often?
Architect Bnp Calibrators (210), Dimension R Clinical Chemistry System (51), Dimension (2), Dimension Vista Clinical Chemistry System (1) and Vitros Immunodiagnostic Products Intact Pth Reagent Pack (1). Widely used products collect more reports because more people use them.
Can the brands table be used to rank the devices?
No. FDA states that "MDR data alone cannot be used to establish rates of events, evaluate a change in event rates over time or compare event rates between devices. The number of reports cannot be interpreted or used in isolation to reach conclusions about the existence, severity, or frequency of problems associated with devices." It adds that the reporting system "has limitations, including the potential submission of incomplete, inaccurate, untimely, unverified, or biased data." Brands differ in how many are in use, how long they have been sold and how reports are collected.
Where this comes from. Counts are built from the openFDA Device Adverse Event (MAUDE) bulk export released 28 Sep 2026, which holds reports FDA received through 31 Aug 2026. Brand, generic and manufacturer names are as written on the reports; product code names come from FDA's device classification. No report narrative, lot number, patient detail or reporter identity is published. See the methodology and sources; FDA's record is authoritative, and corrections are handled within five working days.
Drug data (FAERS) through 30 Jun 2026; device data (MAUDE) through 31 Aug 2026. Not medical advice.